Pioneer DJM-2000 Service Manual page 39

5
(9) Remove the control panel section.
Note ∗:
The flexible cables between the TFTB Assy and
MAIN Assy do not have redundant length.
When detaching the control panel section,
be careful not to pull out or damage the flexible cables.
• Note on Reassembly
When attaching the control panel section to the main unit, make sure that the cables of the Connector Assy (3P),
shown in the figure below, will not be pinched between the edges of the two sections of the housing when closing it.
Barrier (Panel)
CRFD Assy
During reassembly, align the pin
on the control panel with the
hole of the main unit for proper
alignment.
5
6
PNLE Assy
CN7508
CN8001
Style the cables so that they
will not protrude outside.
Connector Assy (3P)
Control panel section
Pin
6
7
∗
Main unit
Hole
DJM-2000
7
8
Control panel section
9
Control panel section
Main unit
39
8
A
B
C
D
E
F