Digi transport User Manual page 2

Digi TransPort User Guide
(Part number 90001019)
Revision Date
A February, 2009
B February, 2009
C April, 2009
D October, 2009
E May, 2005
F March, 2012
G May, 2012
H August, 2012
K April, 2013
L February, 2015
M December,
2015
N January, 2016
Disclaimers
Information in this document is subject to change without notice and does not represent a commitment on
the part of Digi International. Digi provides this document "as is," without warranty of any kind, expressed
or implied, including, but not limited to, the implied warranties of fitness or merchantability for a particular
purpose. Digi may make improvements and/or changes in this manual or in the product(s) and/or the
program(s) described in this manual at any time.
Trademarks and copyright
Digi, Digi International, Digi TransPort, Digi Remote Manager, and the Digi logo are trademarks or registered
trademarks in the United States and other countries worldwide. All other trademarks mentioned in this
document are the property of their respective owners.
© 2016 Digi International. All rights reserved.
Description
Initial Release.
Added bug fixes.
Revised with firmware updates.
Revised with firmware updates.
Added minor changes.
Changed default IP address and added temperature monitoring section.
Updated autosa and ouridtype parameters.
Added GPIO section.
Added several new commands including network status commands, GOBI
image load selection and MultiTX.
Added PPP CLI commands and fixed errors.
Added TransPort WR31 product information. Created Hardware chapter to
house all hardware content for models, including content migrated from
Installation Guides. Addressed several technical issues. Reorganized content
and deleted obsolete product information.
Updated TransPort WR31 serial pinout diagram and links to it. Updated links
and information Dynamic DNS feature.