Elation WW PROFILE User Manual page 21

EditProg – RecCntrl – Working With Built-In Program [continued]
3. Program Selection for Automatic Program Run
"EditProg".
ENTER to confirm.
"Sel Progm ".
ENTER to confirm.
elect "ProPart 1", "ProPart 2" or "ProPart 3", and select which
Slave program is to be sent. Selection "Part 1" means, the Slave unit runs the
same program as the master units.
ENTER to confirm.
MODE/ESC in order to return to the main menu.
4. Program Selection for Edit Program
EditProg".
ENTER to confirm.
"EditProg".
ENTER to confirm.
elect the desired program to edit specific scenes into a specific program.
ENTER to confirm.
MODE/ESC in order to return to the main menu.
5. Automatic Scene Recording
"EditProg".
ENTER to confirm.
"EditScen".
desired scene numbers. A maximum of 250 scenes can be programmed.
ENTER to confirm.
MODE/ESC in order to return to the main menu.
w w w . e l a t i o n l i g h t i n g . c o m
21
WW PROFILE™ User Manual