Table of Contents
Advertisement
240
4-5. Using the driving support systems
The Blind Spot Monitor function detection areas
The areas that vehicles can be detected in are outlined below.
The range of the detection area
extends to:
1
Approximately 11.5 ft. (3.5 m)
from the side of the vehicle
The first 1.6 ft. (0.5 m) from the
side of the vehicle is not in the
detection area
2
Approximately 9.8 ft. (3 m) from
the rear bumper
3
Approximately 3.3 ft. (1 m) for-
ward of the rear bumper
WARNING
■
Cautions regarding the use of the system
The driver is solely responsible for safe driving. Always drive safely, taking
care to observe your surroundings.
The Blind Spot Monitor function is a supplementary function which alerts the
driver that a vehicle is present in the blind spot. Do not overly rely on the
Blind Spot Monitor function. The function cannot judge if it is safe to change
lanes, therefore over reliance could cause an accident resulting in death or
serious injury.
According to conditions, the system may not function correctly. Therefore
the driver's own visual confirmation of safety is necessary.
AVALON (U)_(01999-07001)
Advertisement
Table of Contents
