Table of Contents
Advertisement
294
5-4. Other interior features
3
Test the operation of the
HomeLink
newly programmed button.
If programming a garage door
opener, check to see if the
garage door opens and closes.
If the garage door does not
operate, see if your garage
transmitter is of the Rolling
Code type. Press and hold the
programmed HomeLink
The garage door has the rolling
code feature if the indicator light
(on the HomeLink
idly for 2 seconds and then
remains lit. If your transmitter is
the Rolling Code type, proceed
to the heading "Programming a
rolling code system".
4
Repeat the steps above to program another device for each of
the remaining HomeLink
AVALON (U)_(01999-07001)
®
by pressing the
®
button.
®
) flashes rap-
buttons.
Advertisement
Table of Contents
