Travis Industries 864 HO NB Installation Instructions Manual page 4

Special Instructions for LP
Install the rivet included with this kit into the hole shown below.
Andiron Installation (Optional)
The optional andirons should be installed before installing the logs. See the directions below for installation.
1 Remove the grate from the
firebox. Remove and discard
the two andiron prongs (see
step "a" to the right).
NOTE: The nuts do not need to
be removed, they can be
loosened to remove the prongs.
2 Attach the andiron brackets
(shipped with the burner) to the
grate (see step "b").
3 Attach the andirons using the
screws included with the
andirons (see step "c").
Page 4 of 10
864 HO NB Ember-Fyre Burner W/ Lodge Pine Logs
Installation Instructions
17601715.docx — 8/8/12
(SKU 96900144)
11/32" Nutdriver
a
b
5/32 Hex
Wrench
c
© Travis Industries, Inc.