Dsd Playback - Roksan Audio K3 DAC Instruction Manual

ROKSAN K3 DAC
MANUAL
The advanced Texas Instruments DAC platform supports PCM sample rates up to 192 kHz and
also DSD (Direct Stream Digital) information for both DSD64 (1x) and DSD128 92x)
This is only possible via a computer connected to the K3 DAC USB inputs using a music player
program that is able to read DSD fi les. Numerous programs that can achieve this are available
to download. When DSD information is detected, the DSD LED on the front panel will illuminate
white.
NOTE: With all digital music fi les, playback capability is dependent on the playback engine and
software used.
The K3 DAC employs a 'convenience' feature and is programmed to automatically default onto
the last input that was used for more than 15 seconds. Upon start-up the K3 DAC will revert to
this input. The exception to this if the wireless pairing connection is not achieved. If successfully
paired, however, it will default upon start-up to the Wireless input.
Your K3 DAC has a built-in receiver that can be used with Roksan's K-LINK wireless streaming
technology. Simply connect your desired device using the correct transmitter (see images be-
low) for either a digital or analogue source and, once paired, the transmitter will send the signal
in full CD quality to the receiver in the DAC with a range of up to 150 metres*. The K3 DAC
wireless function is only possible with Roksan's K-LINK technology and a K-LINK transmitter.
KLINK Digital USB transmitter

DSD PLAYBACK

INPUT SELECTION MEMORY
WIRELESS INPUT