Travis Industries 616 GSR Installation Instructions Manual page 5

Log and Ember Chunks Placement
The logs are fragile, especially after being exposed to heat.
•
The burner must be correctly positioned before installing the logs. Make sure the burner is fully seated.
8. Place the rear log as shown below.
NOTE: The left and right middle logs need to be pushed back tight against the rear burner.
Page 5 of 10
616 GSR Traditional Log Set
Installation Instructions
17601679.docx — 6/14/13
Move the log forward until it rests against the tabs on the burners.
(SKU 94500948)
© Travis Industries, Inc.