Boot Menu; Boot Configuration - Gigabyte MW50-SV0 User Manual

2-6

Boot Menu

The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error
message if the legacy drive(s) specified is not bootable.

Boot Configuration

Setup Prompt Timeout
Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting."
Press the numberic keys to input the desired value.
Bootup NumLock State
Enable or Disable Bootup NumLock function.
Options available: On/Off. Default setting is On.
Quiet Boot
Enables or disables showing the logo during POST.
Options available: Enabled/Disabled. Default setting is Enabled.
Boot Option Priorities
Boot Option #1/#2/#3#4#5
Press Enter to configure the boot priority.
By default, the server searches for boot devices in the following secquence:
1. UEFI device.
2. Primary Hard drive.
3. Secondary Hard drive.
4. Network device.
5. USB device
BIOS Setup - 120 -