Change Smbios Event Log Settings; Erasing Settings - Gigabyte MW50-SV0 User Manual

2-4-1 Change Smbios Event Log Settings

Enabling/Disabling Options
Smbios Event Log
Choose options to Enable/Disable logging of System boot event.
Options available: Enabled/Disabled. Default setting is Enabled.

Erasing Settings

Erasing Event Log
Choose options for erasing Smbios Event Log Erasing is done prior to any logging activation during
reset.
Options available: No/Yes, On next reset/Yes, On every reset. Default setting is No.
When Log is Full
Choose options for reactions to a full Smbios Event Log.
Options available: Do Nothing/Erase Immediately. Default setting is Do Nothing.
Smbios Event Log Standard Settings
Log System Boot Event
Choose options to Enable/Dsiable logging of System boot event.
Options available: Enabled/Disabled. Default setting is Enabled.
MECI
Multiple Event Count Increment: The number of occurrences of a duplicate event that must paass before
the multi-event counter associated with the log entry is updated, specified as numberic value in the
range 1 to 33. Press <+> / <-> keys to increase or decrease the desired values.
METW
Multiple Event Time Window: The number of minutes which must pass between duplicate log entries
which utilize a multiple-event counter. The value ranges from 0 to 99 minutes. Press <+> / <-> keys to
increase or decrease the desired values.
BIOS Setup - 114 -