Table of Contents
Advertisement
2-6
Boot Menu
The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error
message if the legacy drive(s) specified is not bootable.
Parameter
Boot Configuration
Setup Prompt Timeout
Bootup NumLock State
Quiet Boot
Endless Retry Boot
Setup Flash
Dump full Setup Data
Dump non-default Setup Data
Restore Setup Data
Description
Number of seconds to wait for setup activation key. 65535 (0xFFFF)
means indefinite waiting.
Press the numeric keys to input the desired values.
Enable/Disable the Bootup NumLock function.
Options available: On, Off. Default setting is On.
Enable/Disable showing the logo during POST.
Options available: Enabled, Disabled. Default setting is Enabled.
Options available: Disable, Enable. Default setting is Disable.
Press [Enter] to run setup flash.
Press [Enter] to dump full setup data to file.
Press [Enter] to dump non-default setup data to file.
Press [Enter] to restore setup data from file.
BIOS Setup
- 88 -
Advertisement
Table of Contents
