Change Smbios Event Log Settings - Gigabyte GA-6LXSV User Manual

2-6-1 Change Smbios Event Log Settings

Enabling/Disabling Options
SEL Components
Change this to enable or disable all features of System Event Logging during boot.
Options available: Enabled/Disabled. Default setting is Enabled.
Erasing Settings
Erasing SEL
Choose options for erasing Smbios Event Log Erasing is done prior to any logging activation during
reset.
Options available: No/Yes, On next reset/Yes, On every reset. Default setting is No.
When SEL is Full
Choose options for reactions to a full Smbios Event Log.
Options available: Do Nothing/Erase Immediately. Default setting is Do Nothing.
Smbios Event Log Standard Settings
Log System Boot Event
Log System Boot Event Choose options to Enable/Dsiable logging of System boot event.
Options available: Enabled/Disabled. Default setting is Enabled.
MECI
Multiple Event Count Increment: The number of occurrences of a duplicate event that must paass before
the multi-event counter associated with the log entry is updated, specifie as numberic value in the range
1 to 33. Press <+> / <-> keys to increase or decrease the desired values.
- 87 - BIOS Setup