Sharp SL-5600 Operation Manual page 29

To set an alarm
1.
On the New Event screen, select the Alarm checkbox.
2.
Set the amount of time prior to the event you want the alarm to ring.
3.
Tap the alarm sound on/off drop-down list button, and select "Silent" or "Loud".
• The alarm will ring and the Alarm screen will appear at the set time, even if the
SL-5600 is off. (Tap "OK" to close the Alarm screen.)
• The alarm will not ring with the following settings:
–The alarm setting is "Silent".
–The Mute checkbox is selected, or the Alarms checkbox is not selected. (Tap
the Sound volume icon on the taskbar.)
• You can make the Email LED indicator flash at an alarm (pre)set time. (See pages
28 and 29.)
Note: With the stereo headphone connected, you hear a sound from the
headphone, not from the built-in speaker.
To repeat an event
1.
On the New Event screen, tap the Repeat button.
The Repeating Event screen appears.
2.
Tap the appropriate repetition button for the event, i.e. "Daily", "Weekly",
"Monthly", or "Yearly".
If you do not want to repeat the event, tap the "None" button.
3.
Enter the necessary information. (See pages 24 and 25 for details.)
4.
Tap to save the repeat setting.
The Repeating Event screen returns to the New Event screen.
23
Calendar