Table of Contents
Advertisement
186 Network Settings (Network)
Auto-detect name
servers checkbox
Primary DNS field
Secondary DNS
field
4.
Tap the "Modem" tab and set the necessary items.
Hardware flow control
checkbox
Wait time slider
Init commands field
Dial using radio buttons Select the dial type (Tone or Pulse).
Speed drop-down list
button
Hardware flow control
checkbox
Wait time slider
Check if you want to set the DNS address assigned by the
server.
Enter the primary and secondary DNS by deselecting the
Auto-detect name servers checkbox.
Enter if you add a special command.
These radio buttons are not displayed for IrDA settings.
Select the communication speed.
Choices are 9600,19200, 38400, 57600, and 115200.
The default setting (115200) is recommended unless you
need to change it.
Check to perform hardware flow control. (default: ON)
Leave it checked unless you need to change it.
Change the time-out for connection by moving the slider,
if necessary.
Init commands field
Dial using radio buttons
(Modem setting only)
Speed drop-down
list button
Advertisement
Table of Contents
