Table of Contents
Advertisement
146 Settings
Beam Receive screen
The Beam Receive screen allows you to set up preferences for IR communication.
1.
On the Settings Home screen, tap the "Beam Receive" application icon.
The Beam Receive screen appears.
Beam receive mode
Manual radio
button
Automatic
radio button
Manual beam receive
Start/Stop
button
Selecting the receiving mode
1.
On the Settings Home screen, tap the "Beam Receive" application icon.
The Beam Receive screen appears.
2.
Tap the desired receiving mode (Manual, Automatic).
3.
Tap
The setting will be effective immediately.
Note: The Automatic-receiving mode consumes more battery power than the
Manual-receiving mode. This is because the IR port is always in
receiving mode when the Automatic option is selected.
The unit receives data in manual mode.
In this mode the unit begins receiving data when you tap
the "Start" button.
The unit receives data in automatic mode.
The unit starts receiving data any time the other unit sends
data and the receiving unit detects a signal.
Tap to start/stop the IR communication for manual beam
receive.
to save the settings.
Beam receive mode
Manual radio button
(recommended)
Automatic radio button
Manual beam receive
Start/Stop button
Advertisement
Table of Contents
