Connecting/Disconnecting To The Network - Sharp SL-5600 Operation Manual

Connecting/disconnecting to the Network

Be sure that you have completed your settings following the procedure of "Network
Settings (Network)" on page 168.
1.
Insert the communication card into the Card slot.
The Connection Status icon (disconnected
Note: Be sure to insert the card with the unit turned on.
When ejecting the card after tapping on the CF(SD) card icon on the
taskbar and selecting "Eject (SD) card".
2.
Tap the Connection Status icon (
The pop-up screen for network connection appears.
Drop-down list button
3.
Tap the drop-down list button to select the desired connection if multiple
connection are available.
4.
Tap "Connect" to start connection.
If the connection to the network is established, the Connection Status icon (
turns to .
During wireless communication, the Connection Status icon displays signal
strength level.
Blue: Excellent, Green: Good, Yellow: Average, Red: Poor.
If the connection is not carried out, make sure that the Network settings are
correct and refer to the online manual, "Troubleshooting Guide".
5.
Tap "Disconnect" to disconnect the line.
If the connection to the network is disconnected, the Connection Status icon
( ) will return to
) on the taskbar.
.
Network Settings (Network) 195
) appears on the task bar.
Tap outside of the
pop-up screen to
close.
)