Hitachi AMS 2100 Getting Started Manual page 49

5. In the Arrays page:
a. Click Add Array to run the Array wizard.
b. Click Next at the first page.
6. When the Search Array page appears (see
address for each controller, which you recorded in
49.
TIP: Alternatively, if you have many controllers, you can click Range of IP
Addresses and enter the starting and ending IP address range in the From
and To fields, respectively.
7. Click Next and Finish to complete the wizard. The newly configured
base unit appears in the Arrays area.
Complete your installation
To complete the configuration procedure, perform the following
configuration tasks based on your storage and environmental requirements
(for details, see the Navigator 2 online help):
• Create, format, delete, and filter logical units
• Create, edit, initialize, delete, and filter targets
• Back up volumes to prevent data loss
• Perform local replication tasks (create, edit, split, resync, restore, and
delete pairs)
• Enable license keys for any storage features that require them
Figure 1-40: Search Array Page
Hitachi AMS 2100/2300 Getting Started Guide
Figure 1-40), enter the IP
Table 1-10 on page 1-
47