Legend:
PATH#0 port
PATH#1 port
CTL 0
CTL 1
Figure 1-5: Location of IN and OUT Ports (Expansion Unit)
Legend:
IN port (ENC0)
OUT port (ENC0)
IN port (ENC1)
OUT port (ENC1)
4. To connect two expansion units, use a supplied ENC cable to connect the
OUT port on the rear of one expansion unit to the IN port on the rear
of the next expansion unit. Repeat this step for each additional
expansion unit you want to add.
Hitachi AMS 2100/2300 Getting Started Guide
11