Hitachi AMS 2100 Getting Started Manual page 33

IP Address
Subnet Mask
Default Gateway
3. Click Next to display the Set up Spare Drive page.
Configure spare drives
The Set up Spare Drive page shows all the spares that can be used in case
one of the drives fails. In this page:
1. Select the drives you want to use as spares. If the drives exceed what
can be shown in the Available Drives area, use the controls at the top
of this area to display other pages of drives.
Figure 1-23: Set Up Host Ports Page (iSCSI Ports)
Table 1-7: Configuring iSCSI Ports
Field
Enter the IPv4 address (dotted-decimal notation).
Enter the network subnet mask (dotted-decimal notation).
Enter the default route.
Hitachi AMS 2100/2300 Getting Started Guide
Description
31