3) Storage
•Display the information and usage of the hard disk drives. If you press the 'Format'
button on each HDD, only that HDD will be formatted.
•Total : Display all the HDD usage being used for the product. If you press the
'Enter' button on here, all the hard disk drives will be formatted.
• HDD Overwrite : Determine whether you want to continue recording if there is no
spare saving space at hard disk drives.
Mirroring : If you install two hard disk drives, you can set the second drive as a
backup drive by mirroring. The mirrored disk size will be the same or greater than
master HDD.
• Auto Deletion : You can select the holding period of the data. If you choose 'OFF',
the DVR keep the maximum data regarding the HDD capacity.
4) S.M.A.R.T (Self-Monitoring Analysis and Reporting Technology)
This function lets you probe the hard disk drives and investigate the status of the
drivers automatically.
•Check day : Determine the date to perform the SMART.
•Boot message : the number of message of showing the errors
•Check Time : Temperature check period
•Limit : The upper tolerance of the hard disk drive temperature
•Alarm out : You can choose Buzzer or Relay
44
CH 3 How to Use