Eyemax WMPR 04 User Manual page 32

③ Quality: Set picture quality. As quality gets higher, screen quality gets better
but saving period gets shorter because file size gets bigger. There
are 4 steps quality such as Super, High, Medium and Low
To save the setting, choose 'Apply' after setting.
4) Event Recording
This is a window setting Event Record Mode. Setting method is same as Conti
Recording method. Conti Recording and Event Recording can be operated
simultaneously.
So during no event input, DVR records by Conti recording settings. However if
there is an event , it starts recording by Event Recording settings during Time(sec).
This function is very useful when you want to operate with the mixture mode.
- Duration(sec): to set post event recording time. You can choose between 1~60
seconds.
- Pre alarm(sec): to set pre event recording time. You can choose 1~4 seconds.
* Event recording has priority in recording. In C/E recording, the recording will
follow conti recording setup in normal condition while it would follow event
recording setup in event generation.
* For convenience, you can use the 'Apply All' menu to change with the same
preference. You don't have to setup each channel if you using the 'Apply All'
function.
[When Scheduler On]
If you select Schedule , following [Schedule Recording] setting window appears. If
you choose Schedule On, the weekly scheduler is activated. Since you can set
recording weekly, you can reduce recording of unnecessary time period. In Scheduler
window, days and channels are displayed, and recording information for each
channel is displayed at bottom of window.
<How to set the weekly scheduler>
1. Choose 'Scheduler' to 'On'.
2. Choose group and drag to wanted time.
3. Press the time bar if you want to set the detailed time.
4. Press 'Enter' button to change the group of the selected area.
5. If you activate 'Holiday' scheduler, choose 'holiday'.
32
CH 3 How to Use