Table of Contents
Advertisement
4) Connection Using PTZ camera
In case of using pan and tilt cameras, connect PAN/TILT DRIVE to product as
shown at following figure.
5) Camera Power Supply
You can provided the camera power supply from the DVR. You can choose DC12V
and AC24V for your convenience. You can operate separately by 8ch. You may
choose DC only, DC 8ch + AC 8ch, and AC only. You need to install the AC 24V
power supply for AC power. (Optional)
CH 2 Installation Method and Cautions
VIDEO CABLE
SPEED
DOME
DC12V
AC24V
DC to AC converting
switch
18
RS485 CABLE
Advertisement
Table of Contents
