Eyemax WMPR 04 User Manual page 11

[I/O Board]
10. Audio In and Out
9. LED
1. USB 2.0 for backup and save
2. Video In: This receives images from cameras and sends them to monitors.
3. LAN Port: This is LAN cable connection terminal.
4. Video Out : For CRT monitor.
5. Extension port: video and mouse extension port to Receiver
6. Alarm Out : 1 relay and 15 TTL. This terminal blocks connect external electric
devices to the product ( Warning Lamp and others).
7. RS485 and Sensor in port : For control the pan and tile cameras. Make sure that the
polarity. 16 sensor input. This terminals can be connected to external sensors.
8. IR Sensor : IR sensor for remote controller.
9. LED : Power, Record and Network
10. Audio In and Out: RCA audio in terminals. You can record four channels at the
same time.
※
For more details, refer to [CH 2. Installation Method and Cautions].
2. Video In
1. USB
8. IR sensor
7. RS485 and
Sensor In
CH 1 Product Introduction
3. LAN port
4. Video Out
5. Extension port
6. Alarm Out
11