Operation; Setting The Units Of Measurement; Weighing; Adding & Weighing (Tare Function) - Silvercrest KH 1159 Operating Instructions Manual

Operation

Setting the units of measurement

You can choose between the metric and the Anglo-
American (Imperial) system. From 0 g - 999 g the
unit is indicated in g/oz and from 999 g in kg/lb
and g/oz.
Additionally, you can weigh liquids.
In the metric system:
• Milliliter (ml) water
• Milliliter (ml) milk.
In the Anglo-American system:
• Fluid ounces (fl´oz) water
• Fluid ounces (fl´oz) milk.
➩ Press the ON/OFF
in the weighing mode. The programmed adjustment
appears under or to the right of the weight
indication in the display
➩ To switch between the metric and Anglo-American
systems, press the UNIT
measurement unit details change.
➩ To switch within a measurement system,
g/kg - ml water - ml milk
oz/lb:oz - fl´oz water - fl´oz milk
t
briefly press the UNIT
measurement unit appears in the display

Weighing

➩ Press the ON/OFF
u
on (weighing mode).
➩ Fold the glass plate
➩ Programme in the desired measurement unit (see
chapter "Setting the units of measurement").
The scales indicate a weight of "0". "O" is shown in
w
the display and on the left.
u button. The scale is now
w
.
t button until the
or
button until the desired
w
.
button to switch the scales
i
down.
➩ Place the bowl
o
onto the scales and then press the button Z/T
The scales once again shows "0", it does not take
account of the weight of the receptacle.
w
In the display
➩ Place the item(s) to be weighed in the receptacle.
Adding & Weighing (Tare Function)
You can repeatedly set the scale back to "0" in order
to weigh additional partial quantities.
➩ To do this, press the Z/T
In the display w
The scales indicate a weight of "0" again.
➩ Place the additional item(s) to be weighed in the
receptacle.
In the display w the weight of the newly inserted
item(s) is indicated.
You can repeat this procedure several times.
However, never place more than 4 kg on the
scale.
On removal of the receptacle and ingredients from
the scales, and on pressing the button Z/T
"O" is once again indicated in the left of the
w
display .

Removing Weighed Items

➩ Press the Z/T button
w
the display and on the left.
The scales indicate a weight of "0" again.
➩ Remove the desired amount of material.
The weight of the removed ingredients appears in
w
the display as a negative value.
You can repeat this procedure several times.
On removal of the receptacle and ingredients from
the scales, and on pressing the button Z/T
"O" is once again indicated in the left of the
w
display .
- 4 -
, or another suitable receptacle,
appears "TARE".
y button once again.
"TARE" appears on the left.
y
once. "TARE" is shown in
y .
y
,
y ,