Setting The Time; Operation; Weighing - Silvercrest 100926 Operation And Safety Notes

After you have inserted the batteries, the scale switches auto-
matically into the time mode
switched into the time mode
LC display
Note: If you do not press another button within 60 seconds,
the set value stops to flash and the time is set.
If the scale is in the time mode
once to switch into the weighing mode.
1. Place the kitchen scale on a solid, flat surface.
44 GB/MT
100926_silv_Digitale Kuechenwaage_Content_ES_IT_PT.indd 44
Setting the time (Fig. A)
. In this event, skip the next two steps.
1
If the scale is in the weighing mode, press and keep pressed
the MODE button
the time mode
5
Press and keep pressed the TARE button
3 seconds to set the time.
Press the MODE button
Press and keep pressed the MODE button
the value-setting process.
Press the TARE button
minute value flashes.
Press the MODE button
Press and keep pressed the MODE button
the value-setting process.
Press the TARE button

Operation

Weighing (Fig. A)
Note: Shortly before the scale switches into the weighing
mode, the scale shows "HELO" in the display for 1–2 sec-
onds.
. As soon as the scale has
5
, the hour value flashes in the
5
for approx. 2 seconds to switch into
3
.
to set the desired hour value.
3
to confirm your setting. Then the
2
to set the desired minute value.
3
to confirm your setting.
2
, press the MODE button
5
for approx.
2
to speed up
3
to speed up
3
3
03.06.14 12:07
2. P
i
3. P
w
L
I
1. F
p
a
2. A
L
s
3. I
L
4. I
t
5. P
c
If the
secon
on th
into t
T
=
=
=