If you do not fasten your seat belt,
you will also see a ''FASTEN SEAT
BELT'' message on the multi-
information display when you turn
the ignition switch to the ON (II)
*
position.
These messages go off several
seconds after the key is inserted into
the ignition switch.
On models with keyless access system
These messages go off after several
seconds.
I n f o r ma t i o n P r o v i d e d b y :
2012 TL
Multi-Information Display
SEL/RESET BUTTON
INFO BUTTONS ( / )
A/T model is shown.
With the ignition switch in the ON
*
(II) position, the multi-information
display changes as shown on page
81
each time you press the INFO
( / ) button or the SEL/RESET
▲ ▼
button.
When you turn the ignition switch
to the ON (II) position, your last
selection is displayed.
:
Models equipped with the keyless access
*
system have an engine start/stop button
instead of an ignition switch. ON Mode
is the equivalent of ON (II). For more
information, see pages
184
and 187.
▲ ▼
*
CONTINUED
79