Acura TL 2012 Owner's Manual page 185

Replacing the Remote Battery
Replace the battery if necessary.
Battery type: CR2032
To replace the battery:
1. Remove the built-in key (see
page 201 ).
2. Place a cloth on the edge to
prevent scratches, then remove
the upper half by carefully prying
on the edge with a coin.
3. Replace the old battery with a new
battery. Place the battery so the
side is facing up. Snap the two
halves of the remote case back
together.
An improperly disposed of battery
can hurt the environment.
Always confirm local regulations for
battery disposal.
I n f o r ma t i o n P r o v i d e d b y :
2012 TL
Keyless Access System
As required by the FCC:
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's
authority to operate the equipment.
＋
This device complies with Industry
Canada Standard RSS-210.
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must
accept any interference that may cause
undesired operation of the device.
181