Changing A Flat Tire - Acura TL 2012 Owner's Manual

Hide thumbs Also See for TL 2012:
Table of Contents

Advertisement

If you have a flat tire while driving,
pull over safely. Drive slowly along
the shoulder until you get to an area
far away from traffic lanes.
The vehicle can easily roll off
the jack, seriously injuring
anyone underneath.
Follow the directions for
changing a tire exactly, and
never get under the vehicle
when it is supported only by the
jack.
1.
Park the vehicle on firm, level, and
non-slippery ground. Put the
transmission in Park (automatic)
or reverse (manual). Apply the
parking brake.
Turn on the hazard warning lights,
2.
and turn the ignition switch to
the LOCK (0) position. Have all
passengers get out of the vehicle
while you change the tire.
:
Models equipped with the keyless access
system have an engine start/stop button
instead of an ignition switch. VEHICLE OFF
(LOCK) Mode is the equivalent of LOCK (0).
For more information, see pages
I n f o r ma t i o n P r o v i d e d b y :
2012 TL

Changing a Flat Tire

3.
Open the trunk. Raise the trunk
floor lid by lifting up on the back
edge.
184
and
187.
CONTINUED
583

Advertisement

Table of Contents
loading

Table of Contents