Acura TL 2012 Owner's Manual page 69

Charging System
Indicator
This indicator has two functions:
1. If it comes on when the engine is
running, the battery is not being
charged, and you will see a
''CHECK CHARGING SYSTEM''
message on the multi-information
display.
2. This indicator also comes on when
the battery needs to be replaced
along with a ''REPLACE
BATTERY'' message on the multi-
information display. For more
information, see page
Immobilizer System
Indicator
This indicator comes on briefly when
you turn the ignition switch to the
ON (II) position. It will then go off if
you have inserted a properly coded
ignition key, on models with keyless
access system, if an appropriate
keyless access remote is used. If it is
not a properly coded key or keyless
access remote, the indicator will
blink, and the engine's fuel system
will be disabled (see page
596 .
＊
149 ).
I n f o r ma t i o n P r o v i d e d b y :
2012 TL
Instrument Panel Indicators
Parking Brake and
U.S. Canada
Brake System
Indicator
This indicator has two functions:
1. It comes on when you turn the
ignition switch to the ON (II) ＊
position. It is a reminder to check
the parking brake. Driving with
the parking brake not fully
released can damage the brakes
and tires.
If you drive without releasing the
parking brake, a beeper will sound,
and you will also see a ''RELEASE
PARKING BRAKE'' message on
the multi-information display (see
page 212 ).
: Models equipped with the keyless access
＊
system have an engine start/stop button
instead of an ignition switch. ON Mode
is the equivalent of ON (II). For more
information, see pages 184 and 187.
CONTINUED
65