Acura TL 2012 Owner's Manual page 588

Changing a Flat Tire
JACK WHEEL NUT
WRENCH
EXTENSION
Take the tool case out of the spare
4.
tire.
5. Unscrew the wing bolt and take
the spare tire out of its well.
6. Take the jack out of the tool kit
case.
7. Place blocks in front and back of
the wheel diagonally opposite the
tire you are changing.
584
WHEEL NUT WRENCH
Loosen each wheel nut 1/2 turn
8.
with the wheel nut wrench.
I n f o r ma t i o n P r o v i d e d b y :
2012 TL
JACKING POINTS
9. Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.