Multi-Information Display
Position Setup
You can customize the MEMORY
POSITION LINK setting in position
setup.
While ''POSITION SETUP'' is shown,
press the SEL/RESET button to
enter the customize mode.
Each time you press the INFO ( /
) button, the screen changes as
▼
shown in the illustration. Press the
INFO ( / ) button until you see
▲ ▼
the custom setting then press the
SEL/RESET button to enter your
selection.
112
▲
: Press the SEL/RESET button.
: Press the INFO button ( / ).
I n f o r ma t i o n P r o v i d e d b y :
2012 TL
▲ ▼
See page 113.