To Remove Jetflash In Mac Os; To Remove Jetflash In Linux; Umsdtools; Umsdtools Installation - Transcend jetflash User Manual

To Remove JetFlash in Mac OS

Drag and drop the Disk icon corresponding to JetFlash into the trashcan. Then,
unplug JetFlash from the USB port.

To Remove JetFlash in Linux

Execute umount /mnt/JetFlash to un-mount the device.
Before removing JetFlash, please make sure the LED is steady and not
flashing! If you remove JetFlash while the LED is flashing,
unpredictable damage to the files and/or JetFlash may occur.
If you don't follow the above procedure to remove JetFlash, data may
be lost due to a write cache issue.
UMSDTools is an Application Program for JetFlash, supported by most
Windows platforms. It adds exciting features to JetFlash, including Security
Function and Boot-Up Function, and Recover Disk to restore JetFlash
function if JetFlash is ever damaged. Before utilizing these features, you need
to first refer to the following procedures to install the UMSDTools Application
Program to JetFlash.
UMSDTools is not supported by Mac or Linux operating systems.

UMSDTools Installation

1. Insert the Driver CD into the CD-ROM. Find Setup.exe in D:\UMSDTools\.
(Where "D" is the drive letter of your CD-ROM drive.) (If JetFlash has been
Resized, you can also find Setup.exe in the Public Area of your JetFlash
『Security Area』 or in the Public Area of a 『Public Area Only』Type.)
2. Double-click on the Setup.exe icon to install UMSDTools.
3. Follow the on-screen instructions to complete UMSDTools installation.

UMSDTools

5