Resize - Transcend jetflash User Manual

Type device contains both a Public Area and a Security Area. Secure data
should be saved to the Security Area, to be protected by password. Access to
data within the Public Area of the 『Security Area』 Type device is unrestricted.
Public Area
『Public Area Only』
Type device
『Public Area Only』 Type device and 『Security Area』 Type device can be
open and accessed at the same time.

Resize

The default configuration of JetFlash is 『Public Area Only』. To establish a
Security Area on JetFlash, or otherwise change the partition type of JetFlash,
you need to use the Resize procedure.
All data on the JetFlash will be erased during execution of Resize.
Before using Resize, make sure you have performed a backup of the
data on your JetFlash.
1. Double-click on
will appear.
Public Area
『Public Area + Security Area』Type
or on the system tray. The UMSD 2.33 window
Log In/Log Out
『Security Area』
Type device
9
Security Area