Boot-Up Function Error Messages; Recover Disk - Transcend jetflash User Manual

Boot-Up Function Error Messages

Your driver installation for Windows 98SE/Me/XP is probably incomplete.
Please make sure the path C:\WINDOWS\COMMAND\EBD in Windows 98/Me
or C:\XP_Bootable in Windows XP exists.
Please make sure the capacity of the Public Area is large enough.
If your JetFlash is ever damaged, you can use the Recover Disk Utility in
UMSDTools to recover it. This Utility will return JetFlash to its initial status.
Running the Recover Disk program will erase all the data on JetFlash.
If there are bad blocks in the flash memory chip of JetFlash, the memory size
of JetFlash after running the Recover Disk program will be smaller than the
original memory size.
1. Double-click on
will appear.
2. Select the Utility tab and click on the Recover Disk button. Recover Disk
performs a low level format of your JetFlash, erasing all data and returning
the JetFlash to the Default configuration. Checking the Scan Disk button
includes Error Checking and Correction (ECC) during the low level format,
Please make sure the Write-Protect
switch is set to

Recover Disk

or on the system tray. The UMSD 2.31 window
21
position.