HP Elite 7300 MT Servicing Manual page 23

Installing a new add-in card
NOTE: The replacement part may look different
than the original part because of manufacturer or
model differences; however, the replacement part
meets or exceeds the specifications of the original
part.
1. Locate where the card will be seated inside the
computer.
Features may vary by model.
2.
Insert the add-in card into the slot on the
motherboard, making sure it is firmly seated in
place.
3.
If the auxiliary power cable was removed,
reconnect it to the motherboard.
Upgrading or Replacing an Add-in Card
21