4.
Using a flathead or Torx screwdriver, loosen the
screw at the back of the computer that secures
the side panel to the computer.
5.
Slide the side panel toward the back of the
computer, and then pull the side panel away
from the computer.
The inside of the computer is exposed.
Features may vary by model.
6.
Lay the computer on a flat surface.
7.
Locate the memory inside the computer.
8.
To release the memory card, press outwards on
the retaining clips on the left and right sides of
the top memory card (1). Holding the memory
card by the edges, gently remove it from the
compartment (2).
9.
To remove additional memory cards, repeat step
8.
Upgrading or Replacing Memory
15