Connector/Processor Damage - Bosch DIVAR AN 5000 Operation Manual

134 en | Maintenance
11.1.3

Connector/processor damage

Caution!
Possible connector damage.
!
Notice also that some cables for both the DIVAR AN 3000 and DIVAR AN 5000 have a lock
which must be pressed and held when inserting/removing the cable. See following figures.
Press pin
Press pin
Caution!
Loose connectors and cables.
!
After installing HDD(s), always make sure that the connectors and cabling are firmly attached
in place with tie wraps and tie cables to prevent connector movement and cable strain (see
arrowed locations in following example). Avoid sharp bends in the SATA cables.
2014.10 | 2.0 | AM18-Q0669
Hold pin and connect cable
Hold pin and connect cable
Operations Manual
DIVAR AN 3000 / DIVAR AN 5000
Bosch Security Systems