Onboard Devices Configuration; Serial Port Configuration - Asus H110M-C D3 User Manual

USB Single Port Control
Allow you to enable or disable the USB Port Disable Override.
USB3_1~4 [Enabled]
Allows you to enable or disable the USB3.0 port 1~4 individually. Configuration
options: [Enabled] [Disabled]
USB 5~10 [Enabled]
Allows you to enable or disable the USB port 5~10 individually. Configuration options:
[Enabled] [Disabled]

Onboard Devices Configuration

HD Audio Controller [Enabled]
[Enabled] Enables the HD Audio Device.
[Disabled] Disables the HD Audio Device.
The following item appears only when you set the HD Audio Controller item to [Enabled].
Front Panel Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or
high‑definition audio depending on the audio standard that the front panel audio
module supports.
[HD Audio]
[AC97]
DVI Port Audio [Disabled]
Allows you to enable or disable audio output from the DVI port. Configuration options:
[Enabled] [Disabled]
Realtek LAN Controller [On]
[On] Enables the Realtek LAN controller.
[Off] Disables the controller.
Realtek PXE OPROM [Off]
This item appears only when you set the previous item to [On] and allows you to enable or
disable the PXE OPRom of the Realtek LAN controller. Configuration options: [On] [Off]
Charging USB devices in Power State S5 [Disabled]
[Enabled] Charges USB devices even when the system is in Power State S5.
[Disabled] Disables this function.

Serial Port Configuration

The sub‑items in this menu allow you to set the serial port configuration.
Serial Port [On]
Allows you to enable or disable the serial port (COM).Configuration options: [On] [Off]
ASUS H110M-C D3
Sets the front panel audio connector (AAFP) mode to high definition
audio.
Sets the front panel audio connector (AAFP) mode to legacy AC'97
2‑25