1.9
Installing an operating system
Motherboard settings and hardware options vary. The setup procedures presented in this
chapter are for reference only. Refer to Windows
detailed information.
Windows
®
Based on the chipset specification, the 100 series requires USB 3.0 drivers to be preloaded
in order to use USB keyboard/mouse during Windows
on preloading USB 3.0 drivers and installing Windows
Method 1: Using SATA ODD & USB devices
Load USB 3.0 drivers using the ASUS support DVD and install Windows
device.
Requirement:
•
1 x ASUS support DVD
•
1 x Windows
•
1 x SATA ODD
•
1 x USB device (ODD or storage)
•
•
1.
Insert the Windows
Windows
2.
Connect the USB ODD or USB storage device to your 100 series platform.
3.
Insert the ASUS support DVD into a SATA ODD on your 100 series platform.
4.
Power on your system and press F8 during POST (Power-On Self Test) to enter the
boot screen.
1-22
7 and USB 3.0 driver for 100 Series
7 installation source
®
The USB storage device requires 8 GB or more capacity. It is recommended to format
the storage device before use.
Use both a USB ODD and a SATA ODD if you want to install Windows
mode.
7 installation DVD into a USB ODD, or copy all files on the
®
7 installation DVD to a USB storage device on a working system.
®
operating system documentation for
®
7 installation. This section is a guide
®
7.
®
7 using a USB
®
Chapter 1: Product introduction
®
7 64-bit UEFI