Asus H110M-C D3 User Manual page 66

Chassis Fan Q-Fan Control [DC Mode]
[PWM mode]
[DC mode]
[Disabled]
The following items appear only when you set the Chassis Fan Q‑Fan Control to [PWM
Mode] or [DC Mode].
Chassis Fan Q-Fan Source [CPU]
This item controls the assigned fan according to the selected temperature source.
Configuration options: [CPU] [MB]
Chassis Fan Speed Low Limit [600 RPM]
This item allows you to disable or set the chassis fan warning speed. Configuration options:
[Ignore] [200RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
Chassis Fan Profile [Standard]
This item allows you to set the appropriate performance level of the chassis fan.
[Standard]
[Silent]
[Turbo]
[Manual]
The following four items appear only when you set Chassis Fan Profile to [Manual].
Chassis Fan Upper Temperature [70]
Use the <+> or <‑> keys to adjust the upper limit of the chassis temperature. The
values range from 40°C to 75°C.
Chassis Fan Max. Duty Cycle(%) [100]
Use the <+> or <‑> keys to adjust the maximum chassis fan duty cycle. The values
range from 60% to 100%. When the chassis temperature reaches the upper limit, the
chassis fan will operate at the maximum duty cycle.
Chassis Fan Middle Temperature [45]
Use the <+> or <‑> keys to set the value for Chassis Fan Middle Temperature.
Chassis Fan Middle Duty Cycle(%) [60]
Use the <+> or <‑> keys to adjust the chassis fan middle duty cycle. The values range
from 60% to 100%.
Chassis Fan Lower Temperature [40]
Use the <+> or <‑> keys to adjust the chassis fans' lower temperature. The values
range from 40°C to 75°C.
Chassis Fan Min. Duty Cycle(%) [60]
Use the <+> or <‑> keys to adjust the minimum chassis fan duty cycle. The values
range from 60% to 100%. When the CPU temperature is under the lower limit, the
chassis fan operates at the minimum duty cycle.
2‑30
Enables the chassis Q‑Fan control in PWM mode for 4‑pin chassis fan.
Enables the chassis Q‑Fan control in DC mode for 3‑pin chassis fan.
Disables the chassis Q‑Fan control feature.
Sets to [Standard] to make the chassis fan automatically adjust depending
on the chassis temperature.
Sets to [Silent] to minimize the fan speed for quiet chassis fan operation.
Sets to [Turbo] to achieve maximum chassis fan speed.
Sets to [Manual] to assign detailed fan speed control parameters.
Chapter 2: Getting started