Overview; Product Configuration - Sony HKC-T1500 Operation Manual

Overview

The HKC-T1500 and the HKC-T3300 CCD Block
Adaptors are adaptor kits for CCD block extension. They
provide you higher mobility by separating the CCD block
of an Sony HDC1500-series/HDC3300 HD Color Camera
from the camera.
Applicable models
HKC-T1500 HDC1500-series HD color cameras
HKC-T3300 HDC3300 HD color camera
As the tally/intercom signals can be checked also on the
separated block, you can perform your shooting without
worrying about the distance from the camera.
In a shooting situation for which you cannot carry the
camera, or in limited space, you can detach the handle
from the separated block and can also fix the block to a
tripod.

Product Configuration

CCD block adaptor (1 ea.)
This adaptor accommodates the CCD block separated
from the camera.
You can perform your shooting by carrying only the CCD
block mounted in this adaptor.
Cable adaptor (1 ea.)
Being mounted in the camera in place of the CCD block of
the camera, this adaptor relays signals between the camera
and the CCD block.
Note
As the HKC-T1500/T3300 is shipped from the factory
with the cable adaptor mounted in the CCD block adaptor,
it is necessary to detach the cable adaptor from the CCD
block adaptor first.
For the detaching procedure, see "Assembly" on page 28.
HDCM-12 cable (12.5 m) (1 ea.)
This cable connects between the CCD block mounted in
the CCD block adaptor and the cable adaptor mounted in
the camera and relays signals and operating power.
For the HKC-T1500, longer cables are available as options
(Multicore Cables):
• HDCM-25 (25 m): Part number 1-820-810-11
• HDCM-50 (50 m): Part number 1-820-811-11
26
Overview
VF relay cable (1 ea.)
Connecting the VF connector of the cable adaptor and the
VF connector of the camera, this cable relays signals
between the viewfinder attached to the CCD block adaptor
and the camera.
MIC relay cable (XLR 3-pin) (1 ea.)
Connecting the MIC connector of the cable adaptor and the
AUDIO IN connector of the camera, this cable relays the
microphone input signals from the CCD block adaptor to
the camera.
INTERCOM relay cable (XLR 5-pin) (1 ea.)
Connecting the INTERCOM connector of the cable
adaptor and the INTERCOM 1 connector of the camera,
this cable relays audio intercom signals between the CCD
block adaptor and the camera.
Top cover (1 ea.)
To use the CCD block adaptor without the handle, attach
this cover in place of the handle.
Camera hanger (1 pair) (HKC-T1500 only)
Attaching these hangers to the CCD block of the camera
makes the task of mounting/unmounting the CCD block
easy.
Cable clamp (1 ea.)
Attaching this clamp to the CCD block adaptor improves
operability by fixing the HDCM cable to the side of the
adaptor.