Connecting Between The Cable Adaptor And Ccd Block Adaptor - Sony HKC-T1500 Operation Manual

Connecting Between the Cable Adaptor and CCD
Block Adaptor
Using the supplied HDCM cable (12.5 m), connect the
OPT HEAD connector of the cable adaptor and the CAM
BODY connector of the CCD block adaptor.
For the HKC-T1500, optionally available HDCM cables
(25 m/50 m) can also be used.
To use the supplied cable clamp
You can fix the HDCM cable to the CCD block adaptor,
using the supplied cable clamp.
1
Assemble the cable clamp and attach it to the cable
clamp base of the CCD block adaptor with the
supplied screws (M3×10).
IN T E
R C O
M
M IC
38

Connecting Between the Cable Adaptor and CCD Block Adaptor

CABLE switch
(The figure shows HKC-T1500.)
For the HKC-T1500, set the switch according to the length of the
HDCM cable to be connected.
(The switch is fixed to 12.5 m on the HKC-T3300.)
C A B L E
m
25 50
V F
12 .5
C O M
IN T E R
M IC
E A D
O P T H
to the OPT HEAD
connector of the cable
adaptor
M3×10 screws
Cable clamp
V F
Notes
• Be sure to use the CCD block with the camera having the
corresponding serial number.
• When you use the HKC-T1500/T3300, update the
software of the camera to the latest version. With the
software before Ver. 1.10, the HDC1500-series camera
will not function in this system. With the software before
Ver. 1.06, the HDC3300 will not function in this system.
:
Supplied special HDCM cable
(The optional cables can also be
used for the HKC-T1500.)
to the CAM BODY connector of
the CCD block adaptor
2
Put the HDCM cable in and close the cable clamp.
V F
IN T E
R C O
M
M IC
L E N S
V F
IN T E
R C O
M
M IC
HDCM cable
LE N S
V F
IN T E
R C O
M
M IC
LE N S