Kenwood CK 404 FS Instructions For Use Manual page 20

GAS TAPS
In the event of operating faults in the gas
taps, call the After Sales Service
Department.
BURNERS
The burners can be removed and washed
with soapy water only.
They will remain perfect if always
cleaned with products used for silver-
ware.
After cleaning, check that the burner-
caps and burner-heads are dry before
placing them in the respective hous-
ings.
C
F
Fig. 8.1
20
CORRECT REPLACEMENT OF THE
BURNERS
It is very important to check that the
burner flame distributor F and the cap C
has been correctly positioned (see figs.
8.1 - 8.2) - failure to do so can cause
serious problems.
Check that the electrode S (figs. 8.1,
8.3) is always clean to ensure trouble-
free sparking.
Check that the probe T (figs. 8.1, 8.3)
next to each burner is always clean to
ensure correct operation of the safety
valves.
Both the probe and ignition plug must
be very carefully cleaned.
Note:
The electrode S must be very
carefully cleaned. To avoid damage
to the electric ignition do not use it
when the burners are not in place.
T
S
Fig. 8.2