Kärcher K 2.54 M Operator's Manual
Hide thumbs Also See for K 2.54 M:

Advertisement

K 2.54 M
English
Español
Français
5.961-867.0 01/06
2
17
33

Advertisement

Table of Contents
loading

Summary of Contents for Kärcher K 2.54 M

  • Page 1 K 2.54 M English Español Français 5.961-867.0 01/06...
  • Page 2 1.3 GPM Call: 1-800-465-4980 for help or visit our Amp draw 13 AMPS website: www.karcher-canada.com Voltage 120 V Part No. 1.672-492.0 Kärcher Customer Support Mexico Serial no. Call: 01-800-024-13-13 for help or visit our website: www.karcher.com.mx For household use only! English...
  • Page 3: Model Overview

    MODEL OVERVIEW 1 High pressure outlet 10 Water inlet with garden hose connector 2 Detergent suction tube with filter 11 Wheels 3 ON/OFF switch 12 Trigger gun 4 Hose/Cord Hook 13 High pressure hose 5 Handle 14 Trigger gun safety lock 6 Collapsable transport handle 15 Dirtblaster®...
  • Page 4: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS WARNING – When using this product physical injuries to the operator and basic precautions should always be fol- irreversible damage to the machine. lowed, including the following: CAUTION – Gun Kicks Back – Hold Read all the instructions before us- with both hands.
  • Page 5 SERVICING OF A DOUBLE- WATER SUPPLY INSULATED PRODUCT (Cold Water Only) In a double-insulated product, two sys- CAUTION tems of insulation are provided instead When connecting the water inlet to the of grounding. No grounding means is water supply mains, local regulations of provided on a double-insulated product, your water company must be observed.
  • Page 6 ASSEMBLY INSTRUCTIONS Required tools Screwdriver, small size (not supplied) for connecting high pressure hose and trigger gun. Assembly STEP 1: Slide the transport handle into place. STEP 2: Insert wheels into the side holes of the unit. STEP 3: Attach the high pressure hose to the trigger gun.
  • Page 7 OPERATING INSTRUCTIONS STEP 1: STEP 5: Connect the high pressure hose to Plug the Ground Fault Circuit Inter- the unit’s high pressure outlet. rupter (GFCI) into a working outlet. – Press “RESET” button. – Press “TEST” button. Red indicator on “RESET” button should appear.
  • Page 8: Using The Accessories

    USING THE ACCESSORIES WARNING Dirtblaster® To avoid serious injury never point This nozzle features a 0º pencil jet spray nozzle at yourself, other per- which rotates 360º for maximum dirt sons or animals. cutting action, effectively increasing Vario Power Spray Wand cleaning performance up to 50%.
  • Page 9: Working With Detergents

    For Kärcher Detergents, check your retailer or visit our website: www.karcher-usa.com/home The following Kärcher detergents are available: One Gallon ready to use STEP 3: All Purpose &...
  • Page 10: Shutting Down & Clean-Up

    TAKING A BREAK five minutes or more STEP 1: Release trigger and engage gun safety lock. STEP 2: Turn pressure washer to OFF (O) position. SHUTTING DOWN & CLEAN-UP STEP 1: STEP 5: Turn the switch to OFF (0) position Disconnect the high pressure hose and unplug cord from outlet.
  • Page 11: Winterizing And Long-Term Storage

    WINTERIZING AND LONG-TERM STORAGE 1: Disconnect all water connections. CAUTION 2: Turn on the machine for a few Failure to follow the above directions seconds, until the water which had will result in damage to the pump as- remained in the pump exits, turn off sembly and accessories.
  • Page 12: Cleaning Tips

    CLEANING TIPS cleaning surface with fresh water. If us- Deck Cleaning ing Kärcher Pressure Wash or Degreas- (with or without detergent). Pre-rinse er, apply to surface at low pressure. For deck and surrounding area with fresh best results, limit your work area to water.
  • Page 13 Optional accessories are available to of water out of a standing source, such further enhance your cleaning capabili- as a barrel or bucket. Fits most Karcher ties. These accessories are accurate as pressure washers up to 2300 PSI. of the printing date of this manual.
  • Page 14 Great for applying deter- back, there is no better solution than gent. Fits most Karcher pressure wash- Karcher's T 100. It saves time by clean- ers up to 2300 PSI. (bayonet) ing a one foot wide area gently as it hov- Part No.
  • Page 15: Troubleshooting

    Troubleshooting CAUTION Disconnect the machine from the power source before making any repair. Symptom Cause Solution Motor will not start On/Off switch is in the “OFF” Turn switch to the “ON” (I) (O) position. position Tripped GFCI plug. Press “RESET” button on GFCI plug.
  • Page 16 If you encounter any additional difficul- Call: 1-800-465-4980 for help or visit our ties not listed, please call website: www.karcher-canada.com 1-800-537-4129 for help or visit our website: www.karcher-usa.com/home Kärcher Customer Support Mexico Call: 01-800-024-13-13 for help or visit our website: www.karcher.com.mx English...

Table of Contents