Connecting To Line Power - Fluke 8808A User Manual

Connecting to Line Power

To avoid shock hazard, connect the factory supplied three-
conductor line power cord to a properly grounded power outlet.
Do not use a two-conductor adapter or extension cord, as this
will break the protective ground connection. If a two-conductor
power cord must be used, a protective grounding wire must be
connected between the ground terminal and earth ground
before connecting the power cord or operating the Meter.
1. Verify that the line voltage is set to the correct setting.
2. Verify that the correct fuse for the line voltage is installed.
3. Connect the power cord to a properly grounded three-prong outlet. See Figure 2-
3 for line-power cord types available from Fluke. Refer to Table 2-2 for
descriptions of the line-power cords.
LC-1
LC-5
Type
North America
North America
Universal Euro
United Kingdom
Switzerland
Australia
South Africa
Shop for Fluke products online at:
XW Warning
LC-2
LC-6
Figure 2-3. Line-Power Cord Types Available from Fluke
Table 2-2. Line-Power Cord Types Available from Fluke
Voltage / Current
120 V / 15 A
240 V / 15 A
220 V / 16 A
240 V / 13 A
220 V / 10 A
240 V / 10 A
240 V / 5 A
MyFlukeStore
www.
Preparing the Meter for Operation

Connecting to Line Power

LC-3 LC-4
LC-7
Fluke Model Number
LC-1
LC-2
LC-3
LC-4
LC-5
LC-6
LC-7
1.877.766.5412
.ca
2
alh03.eps
2-7