Connecting To Line Power; Line-Power Cord Types Available From Fluke - Fluke 8808A Getting Started Manual

8808A
Getting Started Manual

Connecting to Line Power

To avoid shock hazard, connect the factory supplied three-
conductor line power cord to a properly grounded power outlet.
Do not use a two-conductor adapter or extension cord, as this
will break the protective ground connection. If a two-conductor
power cord must be used, a protective grounding wire must be
connected between the ground terminal and earth ground
before connecting the power cord or operating the Meter.
LC-1
North America
North America
Universal Euro
United Kingdom
Switzerland
Australia
South Africa
8
1. Verify that the line voltage is set to the correct setting.
2. Verify that the correct fuse for the line voltage is installed.
3. Connect the power cord to a properly grounded three-prong outlet. See Figure 3
for line-power cord types available from Fluke. Refer to Table 4 for descriptions
of the line-power cords.
LC-2
LC-5
Figure 3. Line-Power Cord Types Available from Fluke
Table 4. Line-Power Cord Types Available from Fluke
Type
XW Warning
LC-3
LC-6
Voltage / Current
120 V / 15 A
240 V / 15 A
220 V / 16 A
240 V / 13 A
220 V / 10 A
240 V / 10 A
240 V / 5 A
LC-4
LC-7
alh3.eps
Fluke Model Number
LC-1
LC-2
LC-3
LC-4
LC-5
LC-6
LC-7