Changing The Lamp; Lamp Assembly - Surefire Powerselect 9AN Commander Manual

CHANGING THE LAMP

1. Remove the Flashlight Head from the
Flashlight Body by holding the Head and ro-
tating the Body counterclockwise (as viewed
from the tail of the Flashlight) until it is free
of the Head.
2. Remove the Nylon Screw that is secur-
ing the Lamp Assembly to the Bezel.
3. Remove the inoperative Lamp Assembly
and replace with the new N90 Lamp Assem-
bly.
Avoid touching the inside of the Lamp en-
velope as this will degrade the performance
of your SUREFIRE Light.
4. Secure the Lamp Assembly to the Bezel
by installing the Nylon Screw.
5. Install the Bezel back on to the Body.
BEZEL

LAMP ASSEMBLY

NYLON SCREW
BODY