Important Buttons - Xoro HTC 2242HD User Manual

Important Buttons

Important buttons and there functions
Set DVB Mode
Press the INPUT button and select the corresponding source, DVB-T (Digital Terrestrial TV), DVB-C
(Digital cable TV), DVB-S (Digital satellite TV) or ATV (Analogue Cable TV). Confirm with OK.
Notes: Programmed timers will be deleted if you switch among DVB-T, DVB-C and Satellite (DVB-
S2).
Channel List
Press the OK button or the CH/LIST button as illustrated on the remote control to access the
channel list. Navigate with ▲/▼ in this list and make the selection with OK. Press EXIT to close the
channel list.
Change TV channel
Press CH– or CH+ to make channel switch.
Select TV Channel
Input number of the wished channel with the numerical buttons.
Previous TV channel
Press the button as illustrated above to go back to the previous TV channel.
Change the Volume
By pressing the VOL– or VOL+ buttons you can adjust the volume.
TV / Radio
Press the OK button to display the channel list. To switch between TV and radio, then press the ►
button repeatedly until the radio list appears. Make a selection with ▲ / ▼ and confirm with OK.
Note:
Digital Radio will be not transmitted in every country.
EPG
Press EPG button to show the EPG information. For detailed information about the
EPG please refer the section about EPG.
Note: EPG has not function under Analogue Cable TV.
Favourite list
If you have defined a favourite list containing your favourite TV or Radio channels,
you have a quick access to this favourite list by pressing the FAV button.
ENG26