Xoro HTC 2242HD User Manual page 112

Picture
By every source except the internal DVD-Player you can change the aspect ratio by pressing the
ASPECT button on the remote control.
Note:
Do not use the 4:3 aspect ratio every time to avoid possible damage on the TFT LCD screen.
Noise Reduction
•
Off
•
Low
•
Middle
•
High
•
Default
Note:
Adjust the noise reduction according to your own impression.
SCREEN
If you use the VGA input, you have several additional options for the adjustment of the picture.
These options are reachable under SCREEN.
Press the ► button to get access to the SCREEN options. The sub-options are:
•
Auto Position
•
Horizontal Position
•
Vertical Position
•
Size
•
Phase
Auto Position
You can uses the Auto adjust option to synchronizes the picture from the PC VGA port in an
optimal way. Press the ► button to synchronizes the screen display.
Horizontal and Vertical Position
With these option you can adjust the VGA picture manually on the screen. Press the ◄ or ►
buttons and the picture shifts to high and width.
Size
Press the ◄ or ► buttons to change the size of the VGA picture on the screen, until a stable image
is obtained.
Phase
Use ◄ or ► buttons to adjust the phase of the ADC sampling clock relative to the H-sync signal,
until a stable image is obtained.
Save the new settings by pressing the MENU button.
To leave the setting press the EXIT button.
ENG42
Settings
Noise reduction is off
The TV set produces a little noise reduction
Middle strength of noise reduction
Strong strength of noise reduction - often with too much sharpness
Standard option for noise reduction