Xoro HTC 2242HD User Manual page 88

Navigate with ▲/▼ to choose an option and make input with ◄/►.
After you have set all parameters, press OK to continue the installation.
Language
Here you can define the language of on-screen display.
Type
Please select you receive cable, air (terrestrial) or satellite signals.
Country
Please select the country where you use the TV.
Tune Type
You can define here whether the channel scan searches only digital or also analogue broadcasts.
Recommendation:
Cable: Analogue+Digital
AIR: Digital
Satellite: Digital (analogue is not available)
Press OK. If you have chosen terrestrial and cable TV, the channel scan starts.
If you have selected Satellite, you will be asked whether to load the
pre programmed channel list. A program list for the Satellite ASTRA
19.2° has been prepared in the software. German broadcasters top
this list.
Press the arrow button „Left" to load this list.
Press the arrow button „Right" to run a channel scan yourselves.
It takes a couple of seconds to load the list, please be patient. You can watch
TV immediately after loading the list.
If you can not receive any program, please check the connection and antenna
settings.
If you do not receive programs over Astra 19.2°, you will have to run a channel scan yourselves.
ENG18
Initial Installation